← All Materials
TPU A80
240°CThermoplastic Polyurethane Shore A80 (TPU A80)
TPU A80 is a soft polyurethane with a rubber-like feel. High elasticity and good abrasion resistance.
Manufacturer's Print Settings
| Hotend Temperature | 240°C |
| Bed Temperature | 50–60°C |
| Chamber Temperature | not required |
| Print Speed | 15–30 mm/s |
| Cooling Fan | 0–50% |
Drying Parameters
70°CTemperature
4 hMinimum Time
Recommendation
The Protype FILO drying cabinet dries filament and feeds it straight into the printer, so it does not pick up moisture again.
⚠ Damp filament causes bubbles and delamination and weakens the part. Dry filament before printing.
Applications
Soft pads
grips
shock absorbers
O-rings
Printer Compatibility
Protype CD400
Compatible
Protype CD400HT
Compatible
Trusted Manufacturers
REC
RU
REC is a Russian manufacturer of engineering filaments. We check its materials by printing and keep profiles for them.
rec3d.ruA-Filament
BY
A-Filament makes 3D printing filament. Standard materials: PETG, PLA, ABS, ASA, SBS, HIPS, TPU.
a-filament.com