Print large housings, tooling, and prototypes in one piece, without splitting and gluing.
Identical or mirrored parts up to half the bed wide in one run.
Auto filament change and built-in drying chambers up to 100 °C for long jobs.
ABS, PA-CF, PC-ABS, TPU — ready profiles for small-batch production of tooling, housings, and spare parts.
We'll calculate CD400 payback for your specific use case — free of charge
Ready print profiles
Select a category → see the profile and typical applications
CD400 is Protype's base industrial printer. IDEX, open material system: ABS, PA-CF, PC-ABS, TPU and other plastics.
Chamber up to 90 °C, bed up to 150 °C — for large parts in PA and PC-ABS.
Auto filament change and built-in drying up to 100 °C. Print progress is visible in ProtypeHub.
Control it via the 22″ touchscreen or remotely through ProtypeHub, VPN access, and the onboard camera.
Attach a 3D model or drawing right on the site — we'll review the geometry and pick a material for the CD400.
Choose the configuration for your tasks
| Parameter | CD400 | CD400HT |
|---|---|---|
| Chamber Temperature | up to 90°C | 145°C for PEI |
| Target Materials | ABS, PA-CF, PC-ABS, TPU | PEEK, PEI |
| IDEX | Yes | Yes |
| Auto filament change | Yes | Yes |
| Starting Price | $39 000 | $55 500 |
CD400 Thermal Chamber
For ABS, PA, PC and ASA: less warping, better layer adhesion.
Hover over a chamber zone for details
CD400 thermal chamber temperature map: operating chamber temperature up to 90 °C. The hot print zone is isolated from the cold mechanics zone by compensators.
Sealed construction with compensators
up to 90 °Cseparates the chamber from the shop floor.
Heat-resistant assemblies and seals
sealsdesigned for sustained operation at chamber temperatures up to 90 °C.
Enclosure thermal insulation
walls and doorsreduces heat loss through walls and doors.
Active convection
activeair inside the chamber is circulated — less warping.
For PEEK, PEI and other high-temperature polymers, see Protype CD400HT →
Key questions before purchasing the Protype CD400 industrial 3D printer
What parts different industries print
Industries Protype printers are suited for
Applications
Jigs, gearboxes, brackets.
What it gives
Tooling is printed in the shop, without ordering from a subcontractor.
Applications
Building models, facades, landscapes.
What it gives
Clients see a physical model before ground is broken — approvals happen faster.
Applications
Fasteners, sensor housings, cable channels.
What it gives
The spare part prints on site instead of waiting for the warehouse.
Applications
Anatomical models, medical device housing prototypes.
What it gives
Models from CT and MRI data, with no molds.
Applications
Fixtures, gears, trays.
What it gives
A new prototype variant — the same day.
Applications
Covers, ducts, fasteners.
What it gives
Complex lightweight geometry without milling.
Applications
Mechanisms, housings, training models.
What it gives
Material and shape are checked before ordering production tooling.
Applications
Supports, gaskets, small hardware.
What it gives
Parts print at the shipyard instead of waiting for a supplier.
Applications
Enclosures, covers, PCB holders.
What it gives
The board changed — reprint the enclosure, no mold rework.
Don't see your industry?
Send a drawing or describe the part — we'll tell you whether 3D printing suits it.
Printer fleet management center
Control all your printers from a single dashboard. Status, queues, telemetry, and remote access via a secure VPN tunnel.
24/7 Monitoring
Real-time status and telemetry for all printers
Secure Channel
Encrypted tunnel, no port forwarding needed
Fleet Management
Multiple machines as a single fleet with shared queue
Buy now, or try the printer in your own workshop first
Compare with other Protype solutions
