← All Materials
TPU A95
240°CThermoplastic Polyurethane Shore A95 (TPU A95)
TPU A95 is a flexible polyurethane of medium hardness. A good balance between flexibility and strength. The most common TPU for 3D printing.
Print Profile
| Hotend Temperature | 240°C |
| Bed Temperature | 50–60°C |
| Chamber Temperature | not required |
| Print Speed | 20–35 mm/s |
| Cooling Fan | 0–50% |
Drying Parameters
70°CTemperature
4 hMinimum Time
Recommendation
Use the Protype FILO drying chamber for automatic filament drying and direct feed into the printer. This prevents re-absorption of moisture and ensures consistent print quality.
⚠ Insufficiently dried filament is the primary cause of defects: bubbles, delamination, and degraded mechanical properties. Always dry before printing.
Applications
Soft grippers
dampers
seals
protective cases
Printer Compatibility
Protype CD400
Compatible
Protype CD400HT
Compatible
Trusted Manufacturers
REC
RU
REC is a Russian manufacturer of engineering filaments. All REC materials are tested on Protype printers, with ready-to-use print profiles included.
rec3d.ru