550°C + 150°C chamber = stable interlayer adhesion. Print functional PEEK parts for aerospace, medical, and petrochemical.
IDEX enables printing two parts simultaneously in Copy and Mirror modes. Doubles output per shift.
4×3 kg filament + built-in drying chambers up to 130°C. Continuous large part printing without operator intervention.
ULTEM 9085/1010, PEKK — materials for prototypes operating in high temperatures and aggressive environments.
We'll calculate CD400HT payback for your specific use case — free of charge
Materials requiring 90 °C+ chamber and 400 °C+ hotend
CD400HT is the high-temperature model for shops that need PEEK, PEKK, and ULTEM. 150 °C chamber, 550 °C hotend, dryer chambers up to 130 °C. This isn't a CD400 upgrade — it's a different class of work: aerospace parts, petrochemical components, medical implants.
Two IDEX extruders print the model and soluble support simultaneously. Or two identical parts in Copy/Mirror mode — doubling shift output. Build volume: 350 × 350 × 400 mm.
Built-in drying at 130 °C is critical for PEEK: damp filament means bubbles and lost strength. In the CD400HT, spools dry during the print itself. Auto filament change (4 × 3 kg) keeps the machine running autonomously for over 10 days.
Designed and assembled in Belarus. Deployed in aerospace, petrochemical, mechanical engineering, and medical manufacturing.
Send your 3D model — we'll analyze the geometry, select the right material, and show you what the CD400HT can deliver.
What sets the high-temperature version apart
| Parameter | CD400HT | CD400 |
|---|---|---|
| Extruder temperature | 550°C | 550°C |
| Chamber temperature | 150°C | 90°C |
| Bed temperature | 250°C | 150°C |
| Build volume | 350×350×400 mm | 400×400×400 mm |
| Target materials | PEEK, PEKK, ULTEM | ABS, PA-CF, PC-ABS |
| IDEX | Yes | Yes |
| Drying chambers | 2×up to 130°C | 2×up to 80°C |
| Auto filament change | 4×3 kg | 4×3 kg |
CD400HT Thermal Chamber
ΔT < 1 °C across the full volume — stable adhesion and predictable geometry for PEEK, PEKK, ULTEM.
Hover over a chamber zone for details
CD400HT thermal chamber temperature map: zone deviation within 1 °C at operating chamber temperature up to 150 °C. The hot print zone is isolated from the cold mechanics zone by bellows compensators.
Sealed construction with bellows
up to 150 °Ccompensates expansion while maintaining seal integrity.
Heat-resistant materials and assemblies
zero degradationoperate at high temperatures without seal degradation.
Enhanced thermal insulation
−70% lossreduces loss through enclosure and doors.
Uniform heat distribution
ΔT < 1 °Cfewer hot spots, reduced internal stresses.
Key questions answered before purchasing an industrial high-temperature 3D printer
02
We integrate Protype into production cycles across industries—from Education to Aerospace
Where Protype printers already work
Applications
Jigs, gearboxes, brackets.
Why it's worth it
Tooling in hours, not weeks. Small-batch costs drop 5–10x while accuracy stays the same.
Applications
Building models, facades, landscapes.
Why it's worth it
Clients see a physical model before ground is broken — approvals happen faster.
Applications
Fasteners, sensor housings, cable channels.
Why it's worth it
The railcar doesn't sit idle while the part ships from a warehouse. Print on-site — minimal downtime.
Applications
Orthoses, prosthetics, anatomical models.
Why it's worth it
Every piece fits the patient's anatomy exactly. No molds needed, ready in a day.
Applications
Fixtures, gears, trays.
Why it's worth it
A failed prototype isn't a setback — it's the next iteration. A new one prints in an hour.
Applications
Covers, ducts, fasteners.
Why it's worth it
Lighter part, more complex geometry — and still ready overnight instead of a month on the mill.
Applications
Mechanisms, housings, training models.
Why it's worth it
Test the material and shape in days rather than waiting months for production tooling.
Applications
Supports, gaskets, small hardware.
Why it's worth it
The yard doesn't wait on a supplier — parts print right in the dock, repairs stay on schedule.
Applications
Enclosures, covers, PCB holders.
Why it's worth it
Changed the PCB layout? Reprint the enclosure. No retooling, no missed deadlines.
Don't see your industry?
Tell us what your facility produces — we'll find a solution to cut costs and speed up part production
Printer fleet management center
Control all your printers from a single dashboard. Status, queues, telemetry, and remote access — no cloud dependency, secured via VPN tunnel.
24/7 Monitoring
Real-time status and telemetry for all printers
Secure Channel
VPN encryption, printers invisible from the internet
Fleet Management
Multiple machines as a single fleet with shared queue
Free for Protype customers
Our clients start printing without tooling and get parts in hours, not weeks
05
Compare with other Protype solutions
